2019
Title of the Paper | Faculty Name | Publication Details |
---|---|---|
Analysis, prediction and multi-response optimization of heat transfer characteristics of a three fluid heat exchanger (TFHE) using Response Surface Methodology and desirability function (DFA) approach | T P MOHAPATRA | Applied Thermal Engineering , Vol. 151, pp. 536-555 |
Multiple response optimizations to improve performance and reduce emissions of Argemone Mexicana biodiesel-diesel blends in a VCR engine | M K PARIDA | Applied Thermal Engineering, Vol. 148, PP. 1454-1466 |
Preparation of nanomaterials from strategic placer heavy minerals recovered from redsediments of badlands topography along the southeast coast of India | S ROUTRAY | Current Science, Vol.116 (8), pp. 1363- 1372 |
Numerical investigation of heat transfer and pressure drop characteristics of fluid flow in an inserted coiled tube type three fluid heat exchanger | T P MOHAPATRA | Heat Transfer—Asian Research, |
A Non-Linear Dynamic Model of Ionic Polymer-Metal Composite (IPMC) Cantilever Actuator | D K Biswal | International Journal of Automotive and Mechanical Engineering |
Analytical investigation and performance optimization of a three fluid heat exchanger with helical coil insertion for simultaneous space heating and water heating | T P MOHAPATRA | Heat and Mass Transfer, Vol. 55, PP. 1723-1740 |
Effect of Chemical Additives on Reduction of Mill Power During Continous Grinding of Chromite Over Burden Materials In A Tumbling Mill: A Case Study | S ROUTRAY | Journal of The Institution of Engineers (India): Series D Vol. 100(1) pp. 123-128 |
2018
Title of the Paper | Faculty Name | Publication Details |
---|---|---|
Soft Factors of Influencing SSCM Implementation in Indian Thermal Power Plants | J N Biswal | 13th International Conference on Recent trends in Engineering Science and Management (ICRTESM-18), 21st - 22nd January, 2018. Vedant College of Engineering & Technology, Bundi, Rajasthan (Affiliated To Rajasthan Technical University, Kota Rajasthan). |
Experimental Investigation on the Bending Response of Multilayered Ag-Ionic polymer-metal Composite Actuator for Robotic Application | D K Biswal | Advanced Materials Letters, Vol. 9, pp. 544-548 |
Recovery of Heavy Minerals from Brahmagiri Deposit, Odisha using Gravity Table | S Routray | Materials Science and Engineering, Vol. 455 |
A framework for assessment of SSCM strategies with respect to sustainability performance: an Indian thermal power sector perspective | J N Biswal | International Journal of Procurement Management, Vol. 11, No.4, pp. 455-460 |
Industrial Application of Valuable Materials Generated From PLK Rock-A Bauxite Mining Waste | S Routray | IOP Conference Series: Materials Science and Engineering , Vol. 338, PP. 012-049 |
Supplier selection criteria for sustainable supply chain management in thermal power plant | J N Biswal | IOP Conference Series: Materials Science and Engineering , Vol. 310, PP. 012016 |
"Experimental investigation and performance optimization of a cross flow heat exchanger by entropy generation minimization approach" | Mr.TaraprasadMohapatra&Sachindra K. Rout | Journal of Thermal Engineering, Vol. 2 |
Optimisation of process parameter using Response SurfaceMethodology to recover ceramic materials from bauxite mining waste rocks | S Routray | Materials Science and Engineering, Vol. 455 |
Challenges and Prospects in Waste Management in Indian Health Care Supply Chain | J N Biswal | Institute of Research Engineers and Scientists- 95th International conference on Science, Technology and Management held in Kuala Lumpur , 1st – 2nd January, 2018. Proceeding Book: |
Scope for beneficiation of heavy minerals in the state of Odisha, India | S Routray | MOJ Mining and Metallurgy, Vol. 1, pp. 62-64 |
Multiple response optimizations to improve performance and reduce emissions of Argemone Mexicana biodiesel-diesel blends in a VCR engine | H Joardar | Applied Thermal Engineering |
Placer deposits of Brahmagiri coast, Odisha - a new resource for industrial heavy minerals | S Routray | IOP Conf. Series: Materials Science and Engineering, Vol. 338 |
Study of distribution of Al-CNT nanocompositesyenthesized via Spark-Plasma Sintering | A. Maiti | IOP Conf Series: Material science and engineering, Vol 338 PP 012014 |
Optimization for Turning of Aluminium and Titanium Di Boride Cast Composites Using Response Surface Methodology | H Joardar | Materials Today: Proceedings, Vol. 5, pp. 23576–23585 |
"Analytical investigation and performance optimization of a three fluid heat exchanger with helical coil insertion for simultaneous space heating and water heating" | Mr.TaraprasadMohapatra | Heat and Mass Transfer (Springer), Vol. 55, pp. 1-18 |
RSM Analysis of In-cylinder Pressure in a DICI Engine Fueled with Argemone Mexicana Biodiesel-diesel Blends | Manoj Kumar Parida | International Journal of Engineering & Technology, Vol. 7, pp. 28-31 |
2017
Numerical analysis of a modified type pulse tube refrigerator. | S K Rout | Energy Procedia, Vol. 109, pp. 456 - 462 |
---|---|---|
Thermal analysis of three sides artificially roughened solar air heaters | S K Rout | Energy Procedia, Vol. 109, pp. 279 - 285 |
Editorial | S K Rout | Energy Procedia, Vol. 109, pp. 1-3 |
Experimental investigation of convective heat transfer in an inserted coiled tube type three fluid heat exchanger | S K Rout | Applied Thermal Engineering, Vol. 117, PP. 297–307 |
Performance analysis of three fluid heat exchanger used in solar flat plate collector system | T P Mohapatra | Energy Procedia, Vol. 109, pp. 322 - 330 |
Evaluation of Barriers of Health Care Waste Management in India—A Gray Relational Analysis Approach | K KMuduli | Proceedings of the 5th International Conference on Frontiers in Intelligent Computing: Theory and Applications, Advances in Intelligent Systems and Computing. |
Critical analysis of drivers and barriers of sustainable supply chain management in Indian thermal sector | J N Biswal | International Journal of Procurement Management, Vol. 10, No.4, pp. 411-430 |
Analysis of Sustainable Supply Chain Design Criteria for Thermal Power Plants | J N Biswal | 8thHuon Conference at PAPUA NEW GUINEA UNIVERSITY OF TECHNOLOGY, 7th – 8th November, 2017 |
Sustainable Supply Chain Management in Thermal Power Sectors of India | J N Biswal | 4th International Conference on Industrial Engineering, SVNIT, Surat (Guj.) 21st – 23rd December, 2017 Proceeding Book:, Page no. 237-239 |
Designing a Framework for Occupational Health and Safety as per Indian context | J N Biswal | 4th International Conference on Industrial Engineering, SVNIT, Surat (Guj.) , 21st – 23rd December, 2017 Proceeding Book:, Page no102-105 |
An experimental investigation and optimization of performance characteristics in EDM of EN-24 alloy steel using Taguchi Method and Grey Relational Analysis | M K Parida | Journal of Materials Today: Proceedings ; Vol 4, issue 8, pp.7438-7447 |
Comparative Analysis of the Performance Effectiveness of Sinking EDM process with Enhancement in Hardness of the parent EN_31 Alloy Steel | M K Parida | Journal of Materials Today: Proceedings ; Vol 4, issue 9, pp.10235-10239 |
Combustion analysis of Argemonemexicana biodiesel blends | M K Parida | Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Vol. 39, No. 7, PP. 698–705 |
Combustion Analysis of Argemone Mexicana biodiesel blends in a constant volume DICI engine | M K Parida | Biofuels |
Impact of induction hardened work piece hardness on EDM performance | B P Mishra | Materials and Manufacturing Processes |
Investigation of performance and emission analysis of Argemonemexicana biodiesel blends as a fuel in a DICI engine at part load conditions | B P Mishra | Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Vol. 39, No. 6, PP. 623–629 |
Supplier Selection Criteria for Sustainable Supply Chain Management in Thermal Power Plant | J N Biswal | International Conference on Advances in Materials and Manufacturing Applications; Organized by AMRITA VISWA VIDYAPITHAM, BENGALURU. 17-19th Aug. |
Magnetic Separation Tree Analysis: A Study on Beach Sand Minerals | S Routray | International Conference on Mineral Processing Technology, Organized by IIME Tamil Nadu Chapter, Feb 1-3, 2017 |
Investigation of Influential Factors of Green Supply Chain Management in Indian Mining Industries: An Empirical Study | K KMuduli | International Journal of Business Excellence; Vol. 12 (3), pp. 351-375. |
Nucleation Enhancement Studies on Aqueous Salt Solutions | D V N Laxmi | Energy Procedia, Vol. 109, pp. 174- - 180 |
Electric field induced strain, switching and energy storage behavior of lead free Barium ZorconiumTitanate Ceramic | S. Chaterjee | Physcia B , Vol.521, PP. 264-269 |
Performance analysis of trapezoidal corrugated solar air heater with sensible heat storage material | D V N Laxmi | Energy Procedia, Vol. 109, pp. 463- - 470 |
An Experimental Study on Water Harvesting from a Modified Window Air-Conditioner | P. Dalai | Energy Procedia, Vol. 109, pp. 253 - 260 |
Performance Analysis of Double Pass Solar Air Heater with Bottom Extended Surface. | R N Parmanik | Energy Procedia, Vol. 109, pp. 331 - 337 |
Dry Sliding Wear Behaviour of Micro oven Treated Fly Ash Reinforced Epoxy Composite using Extended Taguchi Approach Optimization | A. Patnaik | IOP conference Series, Material Science & Engineering 178 (2017) 012004 |
Optimization of process parameters of En8 steel in die-sinking EDM | S SPatro | NCPCM, NIT, Roukela |
Modeling and Validation of Some Combustion Parameters in a VCR Engine Fuelled with Argemone Mexicana Biodiesel-Diesel Blends using RSM | H Joardar | Iranian Journal of Energy & Environment, Vol. 8, No. 3, pp. 181-188 |
Similar and dissimilar joining of automotive sheet using MIG-brazing | S. Basak | LAP LAMBERT Academic Publishing, 17 Meldrum street, Beau Bassin 71504, Mauritius; |
Microstructural characterization of MIG brazed zinc coated steel to aluminium dissimilar joint | S. Basak | International Congress 2017/ Young Professional International Conference, organized by IIW |