Dr. Taraprasad Mohapatra
Associate Professor
Department of Mechanical Engineering
Vision
Mission
Program specific outcomes (PSOs)
Achievements
Events
Under Graduate
Post Graduate
Doctoral
- Pradyumna Kumar Pattnaik , Shoeb Ahmed Syed , Sujogya Mishra , Swarnalata Jena, Sachindar Kumar Rout 4, Kamalakanta MUDULI, Flow of viscous nanofluids across a non-linear stretching sheet, Journal of Thermal Engineering, y Yıldız Technical University Press, Vol 9 3, pp. 593−601, May, 2023, DOI:https://doi.org/10.18186/thermal.1296280
- Aezeden Mohamed , Paul Kuri , Sachindra Kumar Rout , Kamalakanta Muduli Assessment of ec-toxicity potential of fuel by exhaust gas analysis, Journal of Thermal Engineering, y Yıldız Technical University Press, Vol 9 3, pp. 669−678, May, 2023, DOI: https://doi.org/10.18186/thermal.1297582
- Adamu, Nafiu Ishaq, Biswal, Dillip Kumar, Pulagam, Madhu Kalyan Reddy, & Rout, Sachindra Kumar. (2023). Performance analysis of solar desalination system with thermal energy storage materials. Materials Today: Proceedings, 74, 801-807. doi: https://doi.org/10.1016/j.matpr.2022.11.173
- Shafiq Mohamad, , Sachindra Kumar Rout, Senapati, Jnana Ranjan, & Sarangi, Sunil Kumar. (2022). Entropy generation analysis and cooling time estimation of a blast furnace in natural convection environment. Numerical Heat Transfer, Part A: Applications, 82(10), 666-681. https://doi.org/10.1080/10407782.2022.2083861
- Shafiq Mohamad, , Sachindra Kumar Rout, Jnana Ranjan Senapati, & Sarangi, Sunil Kumar.(2023). Numerical Investigation of Conjugate Natural Convection From a Vertical Cylindrical Open Cavity. ASME Journal of Heat and Mass Transfer, 145(8). doi: 10.1115/1.4062428
- Madhu Kalyan Reddy Pulgam, Sachindra Kumar Rout & Sarangi, Sunil Kumar. (2023,2023//). Prediction of Fluid Flow resistance with a flow resistor for a Helium Compressor using CFD approach. Paper presented at the Fluid Mechanics and Fluid Power (Vol. 3), Singapore.
- N S Das, H Joardar, K P Maity, “Generalised upper bound formulation of some rigid-triangle velocity fields for plane-strain extrusion and tube drawing”, Surface Review and Letters, Accepted (2023), ImpactFactor:1.24, DOI:https://doi.org/10.1142/S0218625X23500531.
- R Priyadarshini, H Joardar, S K Bisoy, T Badapanda, “Crystal structural prediction of perovskite materials using machine learning: A comparative study”, Solid State Communications, Vol. 361, pp.115062, (2023), Impact Factor: 1.934,DOI: https://doi.org/10.1016/j.ssc.2022.115062
- D K Adak, V Pal, S Das, T Ghara, H Joardar, N Alrasheedi, B Haldar “Surface Preparation for Coating and Erosion MRR of SS 304 Using Silicon Carbide Abrasive Jet”, Lubricants, Vol. 11, pp. 10-28 (2022), Impact Factor: 3.584, DOI: https://doi.org/10.3390/lubricants11010010
- B Haldar, H Joardar, B Louhichi, N A Alsaleh, A Alfozan, “A Comparative Machinability Study of SS 304 in Turning under Dry, New Micro-Jet, and Flood Cooling Lubrication Conditions”, Lubricants, Vol. 10(12), pp. 359-377, (2022), Impact Factor: 3.584, DOI: https://doi.org/10.3390/lubricants10120359
- Sudhansu S. Mishra, Taraprasad Mohapatra, Sudhansu S Sahoo, Prasheet Mishra, Overall Performance Investigation and Optimization of a Multi-fuel Operated Compression Ignition Engine Using Coupled Taguchi and Grey Relational Analysis, ACS Omega, Vol-37, pp 33216-33232 (2022). Impact Score: 4.132, DOI: https://doi.org/10.1021/acsomega.2c03566.
- Sudhansu S. Mishra, Taraprasad Mohapatra, Sudhansu S Sahoo, Functional Investigation, Multiple Response Optimization, and Economic Analysis of a VCR CI Engine Fired with Diesel, Calophyllum Inophyllum Oil, and Waste Biomass-Derived Producer Gas in Multi-fuel Mode, Arabian Journal for Science and Engineering, Springer Nature, Vol-48, pp 4003-4023 (2022). Impact Score: 2.807, DOI: https://doi.org/10.1007/s13369-022-07349-5.
- Rama Ch. Panda, Sudhansu S. Sahoo, Ashok K. Barik, Taraprasad Mohapatra, Auroshis Rout, Thermal Performance Analysis of Flat Plate Solar Collector Using Nanofluid: A Theoretical Approach, JP Journal of Heat and Mass Transfer, Vol-30, pp 75-88 (2022). Impact Score: 0.22 (SJR), DOI: http://dx.doi.org/10.17654/0973576322057.
- Amar Kumar Das, Taraprasad Mohapatra, Achyut Kumar Panda, Multiple response optimization for performance and emission of a CI engine using waste plastic oil and biogas in dual fuel mode operation, Sustainable Energy Technologies and Assessments, Journal Elsevier, Vol-57, pp 103170 (2023). Impact Score: 7.632, DOI: https://doi.org/10.1016/j.seta.2023.103170.
- Sudhansu S. Mishra, Taraprasad Mohapatra, Energy-exergy-emission-economic performance and multi-response optimisation of a VCR CI engine using bioethanol blended diesel fuel with Al 2 O 3 nanoparticles, International Journal of Exergy, Inderscience Publication, Vol-41, pp 74-90 (2023). Impact Score: 1.467, DOI: 10.1504/IJEX.2023.130943.
- Prasheet Mishra, Taraprasad Mohapatra, Biranchi N. Padhi, Sudhansu Sekhar Sahoo, Sudhansu S. Mishra, Experimentation and Performance Parametric Optimization of Soybean-Based Biodiesel Fired Variable Compression Ratio CI Engine Using Taguchi Method, INTERNATIONAL JOURNAL of RENEWABLE ENERGY RESEARCH (IJRER), Vol-13, pp 326-339 (2023). Impact Score: 0.28 (SJR), DOI: httpsdoi.org10.20508ijrer.v13i1.13486.g8686.
- N Sharma, PK Swain, DK Maiti, “Uncertainty quantification in free vibration and aeroelastic response of variable angle tow laminated composite plate”. Journal of Composite Materials, 00219983231175468. Impact Score 3.19 (2023) DOI: https://doi.org/10.1177/00219983231175468
- N Sharma, PK Swain, DK Maiti, “Static and dynamic control of smart damaged variable stiffness laminated composite plate with piezoelectric layers”. Mechanics Based Design of Structures and Machines. Impact Score 4.36 (2023) DOI: https://doi.org/10.1080/15397734.2023.2203223
- Kushan Verma, Prasant Kumar Swain, Dipak Kumar Maiti, BN Singh, ‘Uncertainty analysis of thermal stresses in shell structure subjected to thermal loads”. International Journal of Mechanics and Materials in Design. Impact Score 3.561 (2023) DOI: https://doi.org/10.1007/s10999-023-09642-z
- Narayan Sharma, Prasant Kumar Swain, Dipak Kumar Maiti, “Aeroelastic control of delaminated variable angle tow laminated composite plate using piezoelectric patches”. Journal of Composite Materials. Impact Score 3.19 (2023)
DOI:https://doi.org/10.1177/00219983221131617 - Narayan Sharma, Prasant Kumar Swain, Dipak Kumar Maiti, “Active flutter suppression of damaged variable stiffness laminated composite rectangular plate with piezoelectric patches”. Mechanics of Advanced Materials and Structures. Impact Score 3.338 (2023) DOI: https://doi.org/10.1080/15376494.2022.2134611
Publications (Conference):
- Rama Ch. Panda, Sudhansu S. Sahoo, Ashok K. Barik, Taraprasad Mohapatra, Auroshis Rout, Performance of Solar Collector Coupled with Three Fluid Heat Exchanger and Heat Storage System for Simultaneous Water and Space Heating, Springer Lecture Notes in Mech. Engg., pp 341-351 (2022). Impact Score: 0.19 (SJR), DOI: https://doi.org/10.1007/978-981-19-4388-1_30.
2023-24
Project Title | Duration | Funding Agency | Amount(in Rupees) |
---|---|---|---|
Synthesis of precipitated silica from waste beach sand tailings and its value addition in glass making industries | Two year | Ministry of Mines | 26.37 lakhs |
A comparative study for recovery and characterization of zircon from different geological occurrences and its application for the preparation of zirconia ceramic crucibles | Two year | IEI, India | 1 lakh |
2021-22
Project Title | Duration | Funding Agency | Amount(in Rupees) |
---|---|---|---|
Preparation of synthetic zircon from zircon minerals of beach sand, its characterization and value addition as thermal and electrical insulator | One year | Ministry of Mines | Rs,10,00,000/- |
Development of complete and indigenous technology for large cooling capacity single stage G M cycle | Three years | BRNS | Rs.36,84,300/- |
Design and fabrication of G-M cryocooler cold head | Six moths | TriQual Cryogenics Pvt Ltd | Rs. 2,65,500 |
2020-21
Project Title | Duration | Funding Agency | Amount(in Rupees) |
---|---|---|---|
Development of an affordable liquid nitrogen generator for medical, veterinary and life science application | One year | BPUT-CRIS | Rs,3,00,000/- |
2019-20
Project Title | Duration | Funding Agency | Amount(in Rupees) |
---|---|---|---|
Fabrication of Cryogenic Device | Six months | Das Enterprises | Rs,2,00,000/- |
Assessment on Distribution of Heavy Minerals along Brahmagiri to Puri Coast and their Recovery with Special Emphasis to Zircon Minerals | Three year | SERB | 26,35,600/- |
Corrosion Behaviour of Sintered Aluminium Metal Matrix Composites Reinforced with Aluminium Oxide | Nine months | IEI, India | 35,000/- |
Consultancy (from Industry)
Sl. No | Name of the Faculty | Title of the Consultancy Project | Funding Agency | Amount (Rs.) | Duration | Date of Sanction | Research Progress |
---|---|---|---|---|---|---|---|
1 | Dr. S. Rout | Fabrication of Cold head and flexible stainless steel hoses | Das Enterprises | 5,00,000/- | One year | March 2021 | Completed |
Total | 5,00,000/- |